See below for some YouTube videos of this weekend’s digital text via analog shortwave broadcast received at my QTH in Herndon, VA. Each includes audio, the Fldigi printout, and the Flex-3000 SDR spectrum display.
Entire VOA Radiogram, 31 March 2013, 1300-1330, 6095 kHz:
Entire VOA Radiogram, 31 March 2013, 0230-0300, 5745 kHz:
The Mighty KBC, 31 March 2013, 0133 UTC, 7375 kHz, MFSK128 test:
The Mighty KBC, 31 March 2013, 0133 UTC, 7375 kHz, MFSK 64 test:
PCJ Radio International, via WRMI Radio Miami International, 31 March 2013, 0227 UTC, 9955 Khz, digital text test using MFSK32:
Using the Flex-3000 and the DRM decoding software I was able to listen to “The Disco Palace”. They broadcast for 1hr a day from 20:00 – 21:00 UTC on 17.875 MHz
Here is my first attempt at receiving the digital transmissons from VOA Radiogram. As you can see PSK125R was very reliable but as the speeds went up I really started to take a lot of hits.
Screenshot for PSK125R
Screenshot for PSK250R
I took a couple of hits on the flmsg but it was perfectly readable:
..and here is the image sent using MFSK32
The entire log file for the transmission:
Before RSID: <<2013-03-24T02:35Z BPSK-31 @ 5745000+1500>>
The Capital Weather Gang are continuing to track a storm that may produce some late season snow on Sunday night into Monday morning.
VOA Radiogram for March 23/24 will be similar to the past weekend’s “soft launch” in that it features the PSK modes. Much of Kim’s script will be the same. In this weekend’s broadcast, however, only one mode at a time will be transmitted. This should improve the signal-to-noise ratio and ability to decode each mode.
Each will be centered on 1500 Hz:
- BPSK31 (1:00)
- PSK63F (1:00)
- BPSK63 (1:00)
- PSKR125 (1:00)
- PSKR250 (1:00)
- PSKR500 (1:00)
- PSKR1000 (1:00)
- PSKR125 (3:45) Plain text
- PSKR250 (2:40) Flmsg* formatted (with html)
- MFSK32 (0:55) Image
*Install Flmsg. Then, in Fldigi: Configure > Misc > NBEMS > under Reception of flmsg files click Open with flmsg and Open in browser, and below that state where your Flmsg file is located.
If decoding performance is still not satisfactory, VOA Radiogram in future weekends will feature more robust modes, such as MFSK, MT63, and Olivia.
VOA Radiogram transmission schedule
(all days and times UTC)
Sat 1600-1630 17860 kHz
Sun 0230-0300 5745 kHz
Sun 1300-1330 6095 kHz
Sun 1930-2000 15670 kHz
All via the Edward R. Murrow transmitting station in North Carolina.
Please send reception reports, audio samples, screenshots, etc., to firstname.lastname@example.org
Ways to monitor amateur radio stations during Hurricane Isaac:
Hurricane Watch Net on 14.325 MHz USB see www.hwn.org
Primary: 14.065 MHz(1000 Hz center) USB
Backups: 7.065 MHz USB and 3.565 MHz USB
*WX_TALK* ONLY USE THIS NODE IF YOU ARE IN THE IMPACTED AREAS, need to preserve bandwidth for emergency traffic only.
*VKEMCOMM* If you are outside of the impacted areas or want to just monitor
For additional VOIP nodes visit http://www.voipwx.net/
This HOW-TO will show you how you can setup your own DIGI Cam.
The steps required to setup your DIGI Cam:
- Create a DynDNS account.
- Download and install webcamXP
- Download and install ManyCam
- Configure ManyCam
- Configure webcamXP
- Configure your Internet Router
If ManyCam is not already running start the application. From the Sources tab, select Desktop. Select Custom desktop. This will allow you to draw a box around the area on your desktop that you want to share. This would typically be the application that you want to share, so in my DIGI cam this is the fldigi application. Remember, what ever appears in this window will be visible on your DIGI cam. Once you have selected the area, click the OK button. You should now see the area in the preview window in ManyCam. To the right of the preview window you should see a dropdown to set the size of the video. Select 1280 x 960 this will make the text much easier to read when viewed.
Click on the Effects tab, select Text over video and uncheck the “Show ManyCam.com Logo” checkbox.
You can now minimize ManyCam.
Select the Web/Broadcast tab. If the Internal web server is already running, click on the Disable button.
Enter the Host Name that you created when you setup your DynDNS account in the IP Address / Host Name field. You can either keep the Web Server Port value or change it to another value. I personally use the port 8050. Leave all the remaining values as is.
Click on the Activate button to start the Internal Web Server.
To verify that the web server is running and streaming the area of the desktop you selected open up your internet browser and enter http://localhost:<port> in my case as I used port 8050 I would enter http://localhost:8050 If everything is setup correctly in webcamXP and ManyCam you should see a web page streaming the content from the selected desktop area that you selected in ManyCam.
Configure your Internet Router
The final step is to configure your internet router to allow inbound traffic on the port that you specified when configuring webcamXP to the computer that is hosting webcamXP. On most routers this will be located in a Port Mapping or Port Routing section. Once you have configured your router a reboot of the router is typically required. You should now be able to view your digi cam stream from outside of your home network.